Download BQ Aquaris M5 stock ROM and install it on your device to restore it to the official stock state. With a stock ROM your BQ smartphone will once again running on the default settings set by BQ. With that your device’s warranty will be restored — only if it’s still valid.

And of course if your existing device is now experiencing system failure such as bootloop and soft-bricked then this stock ROM will fix it.

Well guys if you are here to search for BQ Aquaris M5 Stock ROM to be downloaded and install on your device then you are at the right place.

BQ Aquaris M5 Stock ROM

But first thing first you need to firstly read the preparation points to help you be ready before starting to flash the stock ROM on your device.

Preparations

  • A computer based on Windows or Linux OS computer.
  • You need to also have a  USB data cable to be used on connecting your device to your computer.
  • Make sure you have set your Android USB Debugging Mode enabled.
  • Backup your important data before proceeding.
  • Charge your device’s battery if you regard it’s less power.

How to use flash BQ Aquaris M5 Stock ROM

Make sure you follow the entire steps without skipping any of them guys.

Step 1 —  Download BQ Aquaris M5 firmware to your PC.

Step 2 — Now download SP Flash Tool, extract it to your computer, then open the SP Flash Tool folder, then find and right click on Flash_Tool to select Run As Administrator to open the app (This is for Windows OS).

How To Use SP Flash Tool

Step 3 — After SP Flash Tool is opened, then to the Download tab, and click the Scatter Loading button to locate the scatter file / stock ROM with .text extension you saved on your computer.

How To Use SP Flash Tool 1

Step 4 — Click the MTxxxxx.Android_Scatter. (Look the image to guide you ).

How To Use SP Flash Tool 2

Step 5 — It will load the scatter file.

Step 6 — Now click the Download button now.

How To Use SP Flash Tool 3

Step 7 — Turn off your device then select Power Off  (Notes. If your device’s battery is removable then remove it first before powering it off, or if not just power off your device).

Power Off Android Device

Step 8 — Connect your device to PC using the available USB Data Cable.

Connect Android Device To Computer

Step 9 — To fasten the connection just press these buttons; Volume UP or Volume Down.

Step 10 — The firmware installation procedures are now on, you will see a progressing bar indicating the process. Just wait. Do nothing.

How To Use SP Flash Tool 4

Step 11 — If everything is done, you will find the Download OK small window appear on the SP Flash Tool and that means you did it.

How To Use SP Flash Tool 5
Step 12 — You can close SP Flash Tool and unplug your device from PC now.

Notes. You are recommended to reset your device through Recovery Mode to be sure all errors is kicked out.

Need another model guys? Just head to the BQ stock ROM page. To find your preferred stock ROM.

Related Post

LEAVE A REPLY

Please enter your comment!
Please enter your name here